How to Read a Mill Test Report for Iron Castings
Read a mill test report for iron castings against the ASTM grade on your purchase order, block by block: header,
Read a mill test report for iron castings against the ASTM grade on your purchase order, block by block: header,
Moving a part from gray iron to ductile iron leaves the machining stock and tolerance grades where they were, but
Gray iron fits a pump casing on clean water at ordinary pressure; higher pressure, freezing, abrasive slurry and corrosive liquids
Cast iron pump castings leak on pressure test when porosity in the sections that freeze last joins into a channel
Subsurface pinholes in ductile iron castings are prevented by limiting the hydrogen and nitrogen that reach the metal at the
Look for a foundry that pours ductile iron as its main metal, controls magnesium treatment and inoculation on every ladle,
Most cast iron parts belong in a sand mold: green sand for long runs of parts under a few hundred
An iron casting is proved on five things: chemical composition, mechanical properties from a test bar, microstructure, internal and surface
Cast iron comes in five types — gray, ductile, compacted graphite, white and malleable — and what separates them is
A spark test, a chisel cut or a fresh fracture places an unmarked part on one side or the other,
There is no single ASTM standard for cast iron. ASTM publishes a family of separate iron-casting specifications under Committee A04,
Ductile iron grades are sets of minimum mechanical properties defined by two standards: ASTM A536 in North America, with five
Heat treatment changes the matrix of a ductile iron casting — to ferrite, pearlite, tempered martensite or ausferrite — and
Choose cast steel when the part must take impact, bending or internal pressure and yield before it breaks; choose cast
The difference between ductile iron and gray iron is the shape of the graphite: ductile iron carries it as spheroids,